FIRE FIGHTING WEAR STRUCTURE
| Sub: | Basic Fire Fighting Gear | |
| Classification: | ||
| Material: | Nomex Listed Fabric According to NFPA2112 | |
| Model: | DUS1/6KNOMEX111A | |
| Color: | Dark Blue, Yellow, Black |
| Professional Fire Fighting Suit with International Standards. The Fabric is "UL" Listed according to NFPA 2112. All the requirements of a Fire Fighter and Rescue Operator is included in this Set according to the approved standards. |
| EN 469:2005/AC:2006 – Xf2, Xr2, Y2, Z2 – Level 2 Certified for use at sea under the Marine Equipment Directive 96/98/EC Modules B & D |
| EN 469:2005/AC:2006 – Xf2, Xr2, Y2, Z2 – Level 2 Certified for use at sea under the Marine Equipment Directive 96/98/EC Modules B & D |
| Full length brass zip fastening with cover flap High collar with FR Velcro® fastened cover flap Right breast bellows pocket with side nearest zip sewn flat & standard FR Velcro® fastened flap |
| 002/003 FlamePro® High Volume Pumping (HVP) / Fire Investigation Suit BS EN343 : 2003+A1 : 2007 |
| E Series Structural Fire Coat. PBI Gold Outer Shell, Stedair Moisture Barrier and T-Gard I Runner Thermal Liner. 3M Firetrim Reflective Trim. |
| The E Series Structural Fire Coat Nomex 3D Outer Shell with T-Gard II Plus Thermal Liner has been designed for providing ease of mobility & minimum coat rise. |
| E Series Structural Nomex Trouser features adjustable Velcro side tabs and heavy duty braces. |
|
CE CAT III, EN 407 , EN 388 Soft, Flexible, special insulation Will not stick to glass Glove operational use, cost advantage Use : Glass industry, labor, high temperature Ovens, etc. |
| With Benchmark , safety is the highest concern, monitoring levels of toxicity and allergens; Benchmark FR is unique because of treatment process yields a fabric that is safe to ware directly against the skin and also non-allergenic. Benchmark FR process doesn't use ammonia to cure the retardant and the formulation does not contain any heavy metals or halogens. |
|
Consist of : Throat closure tab located under the collar Pieces under sleeves to increase movement capacity Pockets on the front right and left,closing by FR Velcro fastener 25 cm front opening with a FR Velcro and a single stud Leg hems at least 26 cm Elastic and adjustable braces Elastic belts both on the right and the left elastic kemer Firefighting boots |
| Material: PEDH Pastic 6 point harness and manual adjustment Working temperature: -10 C/ + 50 C Electric insulation up to 440 Vac |
| Welding visor fitted to industrial helmet Climax model 5-RG. Made of Zytel polyamide Incorporates passive fitted tone 12. Shades available: 8-14 Welding glass measurements 110×55 and 110×90 (mm) Climax 16-P earmuffs can be fitted to it. |
| Ventilated injected high temperature thermoplastic shell Quick adjust patented 'Ratchet System' ensures multifunctionality without compromising comfort High performance safety goggles |
| Gallet F1-SF Fire Fighter's Helmet EN 443 : 2008 (helmet); EN 14458 : 2004 (face shield) Clear or metal coated face shield for extended face protection Inner ocular visor for rescue & other operations Chinstrap interface adjustable to the wearer's shape (4 positions) |
| Gallet F1-XF Fire Helmet Adjustable, high performance ocular visor – optimal fit for all faces to prevent injuries Adjustment of the wearing position for an optimal comfort and balance for all user profiles Optimal fit for all users profiles (female, large heads, etc) in all operating conditions |
| Manufactured using both natural and synthetic materials and conforms to the standard quality and performance. Steel toe cap in the footwear protects the wearer's toes against the risk of injury from falling objects and crushing when worn in hazard working environments. |
| Leather Type: | Full Grain, Waterproof | |
| Leather Name: | Amber Mesa Leather | |
| Last: | 694 | |
| Sizes: | D 7-12, 13, 14, 15, EE8-12, 13 | |
| Country: | Made in UK |
| Leather Type: | Full Grain | |
| Leather Name: | Mocha Crazy Horse Leather | |
| Last: | 223 | |
| Sizes: | D 8-12, 13, 14, 15, EE8-12, 13 | |
| Country: | Made in UK |
| Leather Type: | Full Grain, Water-Resistant | |
| Leather Name: | Hazelnut Tramper Leather | |
| Last: | 801 | |
| Sizes: | D 7-12, 13, 14, 15, EE8-12, 13, 14 | |
| Country: | Made in UK |
| Leather Type: | Full Grain, Water-Resistant | |
| Leather Name: | Black Yukon Leather | |
| Last: | 801 | |
| Safety Rating: | ASTM F2892-11, EH | |
| Country: | Made in UK |
|
A flexible, soft glove that absorbs perspiration, for ultra comfortable extended wear and with good mechanical resistance . Seals and protects the hand against chemicals while remaining flexible . |
|
For electrical work with a maximal voltage of 7500 volte. Must be used with a leather overglove. |
|
Handling of high voltage of 17000 volte. Must be used with a leather overglove. |
|
Handling of high voltage of 36000 volte. Must be used with a leather underglove. |
| Gray nitric on palm,nylon Size 8,9 Mechanical hazards Puncture resistance Tear resistance Blade cut resistance Abrasion resistance |
|
Gray nitric on palm,nylon Size 8,9 Mechanical hazards Puncture resistance Tear resistance Blade cut resistance Abrasion resistance |
|
Manufactured on 1st quality cowhide split, lined with cotton Green split reinforcement at palm, thumb and index finger One size Mechanical hazards Puncture resistance Tear resistance Blade cut resistance Abrasion resistance |
| Yellow cow grain driver glove, Size: L and X Mechanical hazards Puncture resistance Tear resistance Blade cut resistance Abrasion resistance |
| Red split leather welder glove , Quailed liner ,One size: 13" Mechanical hazards/ Thermal risks Burning behavior Contact heat Convective heat Radiant heat Small splashes molten metal Abrasion resistance Blade cut resistance Tear resistance Puncture resistance |
|
Made from a mixture of neoprene and latex (blue material) over latex (yellow). The interior top quality flocked cotton increases comfort amd reduces the risk of irritation. Thickness: 0.53 mm Length: 330 mm The glove is manufactured in size 8, 9 and 10. |
| The gloves are made of black 100% natural cotton and the exterior has textured palms. Thickness: 0.70 mm Length: 315 mm The glove is manufactured in size 8, 9 and 10. |
|
|
|
|
|
FIRE FIGHTING MULTIPURPOSE WATE HAND BRANCH PIPE NOZZLE
|
| Maximum working pressure: | PN 16 | |
| Material: | aluminium alloy | |
| Body type: | moulded | |
| Opening: | by lever | |
| Vertical movement: | from +30ْ to +85ْ | |
| Vertical movement adjustment: | with lever | |
| Horizontal movement: | from +25ْ to +25ْ | |
| Horizontal movement adjustment: | with lever | |
| Safety: | locking of the legs, anchoring strap. | |
| Carrying handle: | YES | |
| Foldable legs: | YES | |
| Options: | inlet couplings, outlet equipment, collecting device |
| Maximum working pressure: | PN16 | |
| Material: | bronze | |
| Body type: | moulded | |
| Horizontal movement: | 360ْ | |
| Horizontal movement adjustment: | with handwheels, by operating handle or with chains | |
| Vertical movement: | from -60ْ to +85ْ | |
| Vertical movement adjustment: | with handwheels, with lever or by chains | |
| Options: | outlet equipment |
| Maximum working pressure: | PN16 | |
| Material: | stainless steel | |
| Horizontal movement: | 360ْ | |
| Horizontal movement adjustment: | with lever | |
| Vertical movement: | from -60ْ to +65ْ | |
| Vertical movement adjustment: | with lever | |
| Safety: | locking pins to adjust the horizontal and vertical movements. | |
| Options: | outlet equipment |
| Proban treated fabrics do not smoulder, have no after glow and flame does not spread outside the charred area. Plastic domes with raglan sleeves. |
| 100% Cotton drill raglan sleeve overall with dome fastenings. |
| 100% Cotton drill raglan sleeve overall with dome fastenings. |
| Fully compliant raglan sleeve overall with dome fastenings. 100% Cotton Drill. |
| Stainless steel domes, inset sleeves with split cuff. Two front breast pockets and hip pocket. One piece action back with elastic banded waist. |
| Stainless steel domes, inset sleeves with split cuff. Two front breast pockets and hip pocket. One piece action back with elastic banded waist. |
| Inset sleeves, two breast pockets, hip and ruler pocket, heavy duty brass zip. Elastic back allows for firm fit giving comfort and ease of movement. |
| Stainless steel domes, two breast and two lower front patch pockets also with hip ruler pocket. Sleeveless with back elastic straps. |